This is the inlet pipe connection to the slurry tank. Inlet pipe has to be fitted 6" above the bottom surface of the slurry tank. Here in this I made a pit 6" from the ground so that the inlet pipe touches the ground and this helps in giving additional support to the inlet pipe. Inlet pipe is a 4" pipe and is connected to the tank using a 4"barrel connector.( Minimum size required for the inlet pipe is 4") Inlet pipe need to stand straight 4" above the top surface of the slurry tank. We need to close the inlet pipe with a 4"end cap at the top. Waste is put into the slurry tank through this pipe with equal amount of water added in it.
